I-PEX company solution for new interface connectors for FPD (tablet display) industry

8 月 4, 2023 CONNECTOR

The Cabline®-VS series of the Cabline®-VS series developed and produced by the I-PEX Company is the LED backlight industry standard interface connector defined by the VESA® Association, which has been widely used in the laptop industry for more than 10 years. The high -tech is changing with each passing day, and new demand is also proposed to the connector interface to improve the transmission characteristics. Therefore, I-PEX has developed a series of connection solutions to meet the current and future needs.

Three reasons to need a new type of connection scheme

1.emi interference problem

In recent years, narrow -frame panels have become popular, so the utilization of PCB boards has become higher and higher. Some necessary functional devices (controllers, radio frequency antennas, camera modules) need to be integrated on a PCB substrate. This will cause interference problems between various devices and signals. The launch of a connector with an EMI shield can solve this problem well.

2. The panel interface requires ultra -high -speed data transmission

The pixels of the display panel (2K-> 4K-> 5K-> 8K) and refresh rate (30 Hz-> 60 Hz-> 120 Hz) are gradually improving, and the EDP specifications of the panel industry are also being updated. Therefore Support higher -speed data transmission requirements.

EDP specification:

● RBR (1.62 gbps/lane)

● HBR (2.70 gbps/lane)

● HBR2 (5.40 Gbps/Lane)

● HBR3 (8.10 gbps/lane)

● UHBR20 DP Next generation specification (20 Gbps/Lane)

3. In addition to the panel, the demand for high -speed data transmission in the electronic equipment

Different data transmission standards are becoming more and more urgent. The more popular data interface standards, such as USB, Thunderbolt ™ and DP, have all reached the rate of 20 Gbps/Lane.

The new design concept meets the ultimate coaxial connector Cabline®-VS II ・ CABLINE®-CA II

Cabline-VS II ・ Cabline-CA II series connector is designed with a 360 ° full shielding structure, and the self-lock-type horizontal plug-in polar fine coaxial connector. The main difference is that the spacing of the connector (vs II: 0.5 mm, CA II: 0.4 mm), height (vs II: 1.2 mm max, CA II: 1.1 mm max).

● The application of your company requires a coaxial axis with relatively thick line diameter (the pole fine coaxial axis 45Ω AWG # 36, electronic line AWG # 32), so please use the Cabline-VS II series of products.

● If the occupied area of the connector is relatively small, please use the Cabline-CA II series products.

● Limited to the size of the substrate, but there is a large PIN demand, please use the Cabline-CA II series products.

Product characteristics and advantages:

● Adopt multi -point grounding and high signal integration design, suitable for ultra -high -speed data transmission, support USB4, Thunderbolt ™ 3, DP2.0 (20 Gbps/Lane)

● The connector comes with a 360 ° shielding mechanism, which can prevent EMI interference in all aspects, and perfectly implement the EMI leakage problem in a limited space.

● Mechanical self -locking design can prevent the unpopular insertion. The lock can ensure the reliability of the chimeric ground

● The Cabline®-VS series can be installed in the PCB package of the VS II series, and the Cabline-CA series can be installed in the PCB package of the CA II series

Cabline-VS series, VS II series, or the Cabline-CA series, the CA II series products can perform performance evaluation and comparison in parallel under the same PCB packaging. Customers can choose the optimal solution based on the evaluation results of the actual application.

Solution of the motherboard side connector

The requirements for high -speed data transmission and anti -EMI interference are not limited to the LCD panel side, and the same requirements are also the same as the motherboard side connected to the LCD panel. In order to simplify the design and convenient operation, the connector on the laptop’s motherboard side is generally used with a 90 ° vertical plug -in product. I-PEX’s FPL series (extremely fine coaxial coaxial connector with a spacing of 0.5mm) was widely used. Based on the needs of high -speed data transmission, we provide solutions for vertical plug -in connectors.

Cabline®-UM is a coaxial connector with a spacing of 0.4mm and 90 °. It has the characteristics of 360 ° anti-EMI shielding hood, optional mechanical lock, and the height is 2.20 +/- 0.15 mm

Product characteristics and advantages:

● Adopt multi -point grounding and high signal integration design, suitable for ultra -high -speed data transmission, support USB4, Thunderbolt ™ 3, DP2.0 (20 Gbps/Lane)

● The connector comes with a 360 ° shielding mechanism, which can prevent EMI interference in all aspects, and perfectly implement the EMI leakage problem in a limited space.

● The new type of mechanical lock provides enough public and mother seats to maintain power

Product Sales Overview on the JunctionX Platform:

JunctionX specializes in the professional production, distribution, and sales of connectors/authentic substitute connectors, wire harnesses, cable products, and customized injection-molded parts, stamping parts. If you want to purchase or learn more about product solutions, please feel free to contact us through the following methods.

发表回复

您的电子邮箱地址不会被公开。 必填项已用 * 标注